Showing 55–72 of 974 results
Gummi chuyên cung cấp : Khớp nối Gummi, Ly hợp Gummi và Phanh khí nén Gummi. Gummi Việt Nam
Kể từ khi thành lập vào năm 1968, Gummi đã phát triển thành một công ty hàng đầu toàn cầu trong lĩnh vực sản xuất, tiếp thị và phân phối trong ngành công nghiệp truyền động, trở thành một trong những nhà sản xuất lớn nhất về khớp nối, ly hợp và phanh khí nén.
Gummi Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Gummi HGP Viet Nam
Gummi Air Clutch & Drum Brake – Type LT
Gummi Air Clutch – Type DX
Gummi Marine Clutch – Type FM
Gummi Air Clutch & Drum Brake – Type FKT
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Air Clutch & Drum Brake – Type FKE
Gummi Air Clutch & Drum Brake – Type FK
Gummi Hydraulic Coupling – Type HSD
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Quick Release Valve (QRV)
Gummi Rotorseals
Gummi Air Clutch & Drum Brake – Type LT
Code: Type LT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi LT is an oilfield clutch. Similar to the FK and FKT in design and construction, the LT is used primarily on drilling equipment manufactured in China, Russia, and Romania.
Gummi Air Clutch – Type DX
Code: Gummi DX
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi DX Air Clutches are designed and manufactured to be utilised as high and low drum shaft clutches on draw-works.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FM air clutch and drum brake are purposefully built for marine applications.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi Air Clutch & Drum Brake – Type FKT
Code: Type FKT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FKT is manufactured for extra heavy load applications, operating in the most extreme working conditions.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Gummi Air Clutch & Drum Brake – Type FKE
Code: Gummi FKE
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKE is an expanding version of the FK unit. Best suited for low-speed applications, with smooth starting and stopping loads.
Gummi Air Clutch & Drum Brake – Type FK
Code: Type FK
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FK constricting drum clutch is perfect for high speed, low to medium torque applications where high heat generation is not a factor.
Gummi Hydraulic Coupling – Type HSD
Code: Gummi Type HSD
Industrial Clutch Parts Ltd. distribute a number of Gummi Couplings.
Type HSD is a fluid filled hydraulic coupling, usually applied as a way of controlling the transmitted torque of the prime mover in a drive system.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Gummi Việt Nam / Hotline : 0938 336 079
Gummi chuyên cung cấp : Khớp nối Gummi, Ly hợp Gummi và Phanh khí nén Gummi.
Kể từ khi thành lập vào năm 1968, Gummi đã phát triển thành một công ty hàng đầu toàn cầu trong lĩnh vực sản xuất, tiếp thị và phân phối trong ngành công nghiệp truyền động, trở thành một trong những nhà sản xuất lớn nhất về khớp nối, ly hợp và phanh khí nén.
Gummi Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Gummi HGP Viet Nam
Gummi Air Clutch & Drum Brake – Type LT
Gummi Air Clutch – Type DX
Gummi Marine Clutch – Type FM
Gummi Air Clutch & Drum Brake – Type FKT
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Air Clutch & Drum Brake – Type FKE
Gummi Air Clutch & Drum Brake – Type FK
Gummi Hydraulic Coupling – Type HSD
Gummi Air Clutch & Drum Brake – Type FKR
Gummi Quick Release Valve (QRV)
Gummi Rotorseals
Gummi Air Clutch & Drum Brake – Type LT
Code: Type LT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi LT is an oilfield clutch. Similar to the FK and FKT in design and construction, the LT is used primarily on drilling equipment manufactured in China, Russia, and Romania.
Gummi Air Clutch – Type DX
Code: Gummi DX
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi DX Air Clutches are designed and manufactured to be utilised as high and low drum shaft clutches on draw-works.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FM air clutch and drum brake are purposefully built for marine applications.
Gummi Marine Clutch – Type FM
Code: Type FM
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi Air Clutch & Drum Brake – Type FKT
Code: Type FKT
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FKT is manufactured for extra heavy load applications, operating in the most extreme working conditions.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Gummi Air Clutch & Drum Brake – Type FKE
Code: Gummi FKE
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKE is an expanding version of the FK unit. Best suited for low-speed applications, with smooth starting and stopping loads.
Gummi Air Clutch & Drum Brake – Type FK
Code: Type FK
Industrial Clutch Parts Ltd. supplies Gummi drum clutches and brakes.
Gummi FK constricting drum clutch is perfect for high speed, low to medium torque applications where high heat generation is not a factor.
Gummi Hydraulic Coupling – Type HSD
Code: Gummi Type HSD
Industrial Clutch Parts Ltd. distribute a number of Gummi Couplings.
Type HSD is a fluid filled hydraulic coupling, usually applied as a way of controlling the transmitted torque of the prime mover in a drive system.
Gummi Air Clutch & Drum Brake – Type FKR
Code: Gummi FKR
Industrial Clutch Parts Ltd. supplies a complete range of Gummi Drum Clutches and Brakes.
Gummi FKR units are commonly referred to as couplings. The neoprene rubber facing engages with the drum directly.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Gummi Việt Nam / Hotline : 0938 336 079
EMG chuyên cung cấp : Bộ truyền động EMG, Bộ điều khiển phanh EMG, Bộ truyền động điện thủy lực EMG. EMG Việt Nam
EMG Automation GmbH, một công ty thuộc tập đoàn elexis, chuyên phát triển và cung cấp các giải pháp tự động hóa và đảm bảo chất lượng cho quy trình sản xuất cũng như các linh kiện an toàn ELDRO® & ELHY®.
EMG Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
EMG HGP Viet Nam
EMG ELDROclassic®
EMG ELDRO® New Generation
EMG ELDRO® Ex
EMG ELDROdynamic®
EMG ELDRO® direct current
EMG ELHY®
Eldro Electro-Hydraulic Thruster – Standard Series Ed630/9
Code: Eldro Ed630/9
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed630/9 Technical Values:
Lifting Torque: 6300 N
Stroke Path: 80 – 120 mm
Power Consumption: 700 w
Eldro Electro-Hydraulic Thruster Ed301/6
Code: Eldro Ed301/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Ed301/6 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 2000 N
Stroke: 60 mm
Power Consumption: 450 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed80/6
Code: Eldro Ed80/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro Ed80/6 electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 3500 N
Stroke: 200 mm
Power Consumption: 550 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed30/5
Code: Eldro Ed30/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed30/5 Technical Values:
Lifting Force: 500 N
Stroke: 60 mm
Power Consumption: 210 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed12/4
Code: Eldro Ed12/4
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Ed12/4 Technical Values:
Lifting Force: 120 N
Stroke Path: 40 mm
Temp Range: -25 °C up to +50 °C
Eldro Electro-Hydraulic Thruster – Standard Series Ed23/5
Code: Eldro Ed23/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed23/5 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 220 N
Stroke Path: 50 mm
Temp Range: -25 °C up to +50 °C
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
EMG Việt Nam / Hotline : 0938 336 079
EMG chuyên cung cấp : Bộ truyền động EMG, Bộ điều khiển phanh EMG, Bộ truyền động điện thủy lực EMG.
EMG Automation GmbH, một công ty thuộc tập đoàn elexis, chuyên phát triển và cung cấp các giải pháp tự động hóa và đảm bảo chất lượng cho quy trình sản xuất cũng như các linh kiện an toàn ELDRO® & ELHY®.
EMG Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
EMG HGP Viet Nam
EMG ELDROclassic®
EMG ELDRO® New Generation
EMG ELDRO® Ex
EMG ELDROdynamic®
EMG ELDRO® direct current
EMG ELHY®
Eldro Electro-Hydraulic Thruster – Standard Series Ed630/9
Code: Eldro Ed630/9
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed630/9 Technical Values:
Lifting Torque: 6300 N
Stroke Path: 80 – 120 mm
Power Consumption: 700 w
Eldro Electro-Hydraulic Thruster Ed301/6
Code: Eldro Ed301/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Ed301/6 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 2000 N
Stroke: 60 mm
Power Consumption: 450 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed80/6
Code: Eldro Ed80/6
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro Ed80/6 electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 3500 N
Stroke: 200 mm
Power Consumption: 550 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed30/5
Code: Eldro Ed30/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed30/5 Technical Values:
Lifting Force: 500 N
Stroke: 60 mm
Power Consumption: 210 W
Eldro Electro-Hydraulic Thruster – Standard Series Ed12/4
Code: Eldro Ed12/4
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters.
Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Ed12/4 Technical Values:
Lifting Force: 120 N
Stroke Path: 40 mm
Temp Range: -25 °C up to +50 °C
Eldro Electro-Hydraulic Thruster – Standard Series Ed23/5
Code: Eldro Ed23/5
Industrial Clutch Parts Ltd. offers a competitive price for Eldro electrohydraulic thrusters. We supply the complete range of Eldro classic standard series thrusters.
Ed23/5 Eldro electrohydraulic thrusters are designed for releasing brakes and operating flaps or gates.
Lifting Force: 220 N
Stroke Path: 50 mm
Temp Range: -25 °C up to +50 °C
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
EMG Việt Nam / Hotline : 0938 336 079
Eide chuyên cung cấp : Phanh an toàn Eide, Phanh Eide, Ly hợp Eide, Bộ ly hợp Eide, Bộ giới hạn mô-men xoắn Eide, Khớp nối Eide. Eide Việt Nam
Eide sản xuất một loạt các ly hợp, phanh và thiết bị truyền động theo yêu cầu. Thiết bị sản xuất nội bộ của Eide cho phép triển khai nhanh chóng, đáng tin cậy và an toàn các giải pháp hoàn chỉnh tùy chỉnh.
Eide Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Eide HGP
FPC-500
FPC-1000
FPC-3500
FPC-6000
FPC Progressive Safety Gear (Parachute Brake)
The FPC safety brake is an overspeed-triggered protection system designed for vertical transport.
EC Centrifugal Brake
Engineered for passive speed control, the EC brake intervenes autonomously during motor failure or loss of descent control.
DBQ Centrifugal Brake
FNB Negative Pneumatic Brake
The FNB brake operates on the fail-safe principle: braking is applied via spring pressure and released only when pneumatic pressure is present. Designed for both horizontal and vertical shafts, it stands out for its zero residual torque and instantaneous response time, significantly optimising machine duty cycles.
EIDE specialises in the design and manufacture of industrial brakes, both pneumatic and electromagnetic.
BrakesBrakespneumatic brakeBrakesBrakesBrakesBrakesBrakes
The FNAM pneumatic brake, a negative brake, provides a safe stop and can brake moving masses or loads.
The FNH pneumatic brake can be used continuously because the brake disc has a radiator with high heat dissipation capacity.
The FNC pneumatic brake is designed to work in continuous friction with very little wear and without generating vibrations or noise.
The FAE electromagnetic brake consists of the armature with the friction material and the rotor, which in turn is formed by the armature with the spring-membrane.
The FAE/M electromagnetic brake is a brake that acts when no direct current is applied and is particularly suitable for safety applications.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Eide Việt Nam / Hotline : 0938 336 079
Eide chuyên cung cấp : Phanh an toàn Eide, Phanh Eide, Ly hợp Eide, Bộ ly hợp Eide, Bộ giới hạn mô-men xoắn Eide, Khớp nối Eide.
Eide sản xuất một loạt các ly hợp, phanh và thiết bị truyền động theo yêu cầu. Thiết bị sản xuất nội bộ của Eide cho phép triển khai nhanh chóng, đáng tin cậy và an toàn các giải pháp hoàn chỉnh tùy chỉnh.
Eide Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Eide HGP Viet Nam
FPC-500
FPC-1000
FPC-3500
FPC-6000
FPC Progressive Safety Gear (Parachute Brake)
The FPC safety brake is an overspeed-triggered protection system designed for vertical transport.
EC Centrifugal Brake
Engineered for passive speed control, the EC brake intervenes autonomously during motor failure or loss of descent control.
DBQ Centrifugal Brake
FNB Negative Pneumatic Brake
The FNB brake operates on the fail-safe principle: braking is applied via spring pressure and released only when pneumatic pressure is present. Designed for both horizontal and vertical shafts, it stands out for its zero residual torque and instantaneous response time, significantly optimising machine duty cycles.
EIDE specialises in the design and manufacture of industrial brakes, both pneumatic and electromagnetic.
BrakesBrakespneumatic brakeBrakesBrakesBrakesBrakesBrakes
The FNAM pneumatic brake, a negative brake, provides a safe stop and can brake moving masses or loads.
The FNH pneumatic brake can be used continuously because the brake disc has a radiator with high heat dissipation capacity.
The FNC pneumatic brake is designed to work in continuous friction with very little wear and without generating vibrations or noise.
The FAE electromagnetic brake consists of the armature with the friction material and the rotor, which in turn is formed by the armature with the spring-membrane.
The FAE/M electromagnetic brake is a brake that acts when no direct current is applied and is particularly suitable for safety applications.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Eide Việt Nam / Hotline : 0938 336 079
Deserti Meccanica chuyên cung cấp : Bộ giới hạn mô-men xoắn Deserti Meccanica, Phanh điện từ Deserti Meccanica, Ròng rọc Deserti Meccanica, Khớp nối Deserti Meccanica, Vòng đệm Deserti Meccanica, Đĩa ma sát Deserti Meccanica. Deserti Meccanica Việt Nam
Deserti Meccanica cung cấp một loạt các bộ giới hạn momen xoắn cả cơ khí và khí nén để đáp ứng mọi nhu cầu. Luôn chú trọng đến sự phát triển của thị trường và nhu cầu của khách hàng, Deserti Meccanica đã mở rộng dòng sản phẩm bộ giới hạn momen xoắn với một loại sản phẩm mới quan trọng: Năm 2000, công ty một lần nữa tiên phong trên thị trường khi là công ty Ý đầu tiên sản xuất và tiếp thị bộ giới hạn momen xoắn “KHÔNG CÓ ĐỘ RƠ” hướng tâm và xoắn.
Deserti Meccanica Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Deserti Meccanica HGP
LS Series
LASS Series
LASS AIR Series
SGR Series
DM SM PM Series
LINEAR series
MICRO DAMM Series
GS Series
Deserti Backlash Free Torque Limiter SGR Series
Code: SGR-Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
Torque limiters of the “backlash-free” series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload but where it is recommended to maintain a fixed and determined point of transmission.
Deserti Torque Limiter LS Series
Code: LS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
The friction torque limiters allow immediate release from the excess torque applied to the transmission; they do not need resetting and permit a direct visual inspection of operating conditions.
Deserti Torque Limiter Lass Air Series
Code: Lass Air Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The pneumatically operated series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter Lass Series
Code: Lass Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter
Code: DGZ-ZGS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload.
Radial/torsional value=0 during the transmission of motion.
No residual torque after disengagement.
Possibility of combining a switch/proximity to stop the engine.
High sensitivity and maintenance free.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Deserti Meccanica Việt Nam / Hotline : 0938 336 079
Deserti Meccanica chuyên cung cấp : Bộ giới hạn mô-men xoắn Deserti Meccanica, Phanh điện từ Deserti Meccanica, Ròng rọc Deserti Meccanica, Khớp nối Deserti Meccanica, Vòng đệm Deserti Meccanica, Đĩa ma sát Deserti Meccanica.
Deserti Meccanica cung cấp một loạt các bộ giới hạn momen xoắn cả cơ khí và khí nén để đáp ứng mọi nhu cầu. Luôn chú trọng đến sự phát triển của thị trường và nhu cầu của khách hàng, Deserti Meccanica đã mở rộng dòng sản phẩm bộ giới hạn momen xoắn với một loại sản phẩm mới quan trọng: Năm 2000, công ty một lần nữa tiên phong trên thị trường khi là công ty Ý đầu tiên sản xuất và tiếp thị bộ giới hạn momen xoắn “KHÔNG CÓ ĐỘ RƠ” hướng tâm và xoắn.
Deserti Meccanica Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Deserti Meccanica HGP Viet Nam
LS Series
LASS Series
LASS AIR Series
SGR Series
DM SM PM Series
LINEAR series
MICRO DAMM Series
GS Series
Deserti Backlash Free Torque Limiter SGR Series
Code: SGR-Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
Torque limiters of the “backlash-free” series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload but where it is recommended to maintain a fixed and determined point of transmission.
Deserti Torque Limiter LS Series
Code: LS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings).
The friction torque limiters allow immediate release from the excess torque applied to the transmission; they do not need resetting and permit a direct visual inspection of operating conditions.
Deserti Torque Limiter Lass Air Series
Code: Lass Air Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The pneumatically operated series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter Lass Series
Code: Lass Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical transmissions and relevant assemblies that are subjected to repeated overloading.
Deserti Torque Limiter
Code: DGZ-ZGS Series
Industrial Clutch Parts Ltd. supply a diverse range of Deserti Torque Limiters (safety couplings). The ‘backlash free’ series are safety devices which protect mechanical components that are subject to repeated and different kinds of overload.
Radial/torsional value=0 during the transmission of motion.
No residual torque after disengagement.
Possibility of combining a switch/proximity to stop the engine.
High sensitivity and maintenance free.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Deserti Meccanica Việt Nam / Hotline : 0938 336 079
ComInTec chuyên cung cấp : Bộ giới hạn momen xoắn ComInTec, Bộ ly hợp khí nén ComInTec, Các khớp nối đàn hồi ComInTec, Các khớp nối đệm ComInTec, Vòng khóa ComInTec, vòng đệm ComInTec, Ròng rọc điều tốc ComInTec, đế trượt động cơ ComInTec. ComInTec Việt Nam
Được thành lập ban đầu vào năm 1967 bởi Dante Cavalli, ngày nay ComInTec cung cấp các giải pháp chất lượng cao thông qua thiết kế và sản xuất: các bộ phận truyền động, bộ giới hạn momen xoắn, khớp nối an toàn, bộ giới hạn momen xoắn không khe hở, khớp nối đàn hồi, khớp nối đĩa, khớp nối không khe hở, ròng rọc tốc độ biến đổi, ròng rọc giãn nở, vòng kẹp trục và vòng kẹp.
ComInTec Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
ComInTec HGP Viet Nam
DF
Friction torque limiter
Sliding Safety coupling where the transmission component is fitted between two friction rings and slides when the calibrated torque is reached. The minimum required to have a low cost protection.
EDF/F
Economic ball torque limiter
Safety coupling with simple and compact balls inserted directly in the drive element of transmission. The disengagement occurs quickly and safely if the calibrated torque is exceeded.
DSR
Rollers torque limiter
A Roller safety coupling that allows a complete disengagement when the calibrated torque is reached. Suitable for transmitting high torque with high reliability and small size.
DSS/SG
Backlash free torque limiter
Ball safety coupling with high technology and backlash free transmission. Device with high sensitivity of intervention, instant and precise disconnection.
DSS/SG/RF
Torque limiter free rotation
Backlash free Safety coupling suitable for high speeds, with free rotation and low residual torque after disengagement that occurs in a precisely and immediately. The re-engagement is manual.
DSM
Modular torque limiter
Modular Safety coupling, robust, suitable for “heavy industries” even at high speeds. After disconnection there is free rotation without residual torque, re-engagement is simple and manual.
PR
Torque limiter for gearboxes
Safety coupling to be mounted between the motor and gear unit thus reducing significantly the size of the device at the same power output. Available in both slip that release versions.
DSA
Axial force limiter
Safety coupling with linear limitation of force. The axial disengagement can take place in both compression and tension once the calibrated force is reached, the re-engagement is automatic.
Roller phase pneumatic clutch “DSR/F/AP”
Transmission through rollers with re-engagement in phase 360° (equidistant on request, 30°, 45°, …);
Free rotation for long periods after overload: … / CS;
Suitable for high rotation speeds;
Maintenance free for high reliability;
Arranged to add a microswitch / proximity to stop the motor drive;
Torque range: 5 – 30000 Nm; max. bore ø120 mm.
Friction pneumatic clutch “DSF/TF/AP”
Friction torque transmission;
As tensioner, brake and torque limiter;
Constant adjustment of the calibration torque;
Available with special friction rings for specific requirements;
Available in version …/SI to stop the transmission after an overload;
Torque range: 3 – 875 Nm; max. bore ø 65 mm.
Electromechanical switch “EM”
Die-cast aluminium box;
Protection level IP57 DIN 40050;
Possibility of 1 contact (EM1) or 2 contacts (EM2) available;
Adjustment of the lever end position possible;
Operation temperature range from -10°C to +85°C;
Three different options of voltage input: 1,5A – 250 VCA; 5A-24 VCC; 0,2A-250 VdC;
Initial stroke 0,7 mm, Extra stroke: 4 ÷ 8 mm depending on setting (possible in a range of 6 mm).
GTR
Torsionally rigid disc coupling with angular backlash free transfer of motion. Transmission and maximum flexibility in operation. Available with personalized spacer.
GRI
Rigid coupling in steel, suitable for shaft connections with good alignment. Available in one or two sections.
GSF
Bellow coupling in aluminium with high torsional rigidity. Backlash free, low inertia and high reliability.
GAS
Elastomeric jaw coupling, good vibration dampening properties. Available with different types of elastomeric element.
GEC
Compact elastic coupling protected from environmental conditions. Fast maintenance possible without the need to move the shafts.
GD
Gear coupling without wear due to the polyamide sleeve, suitable for high axial misalignments.
GC
Chain coupling, simple, economic and easy to assemble. Suitable for dry and dusty environments.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
ComInTec Việt Nam / Hotline : 0938 336 079
ComInTec chuyên cung cấp : Bộ giới hạn momen xoắn ComInTec, Bộ ly hợp khí nén ComInTec, Các khớp nối đàn hồi ComInTec, Các khớp nối đệm ComInTec, Vòng khóa ComInTec, vòng đệm ComInTec, Ròng rọc điều tốc ComInTec, đế trượt động cơ ComInTec.
Được thành lập ban đầu vào năm 1967 bởi Dante Cavalli, ngày nay ComInTec cung cấp các giải pháp chất lượng cao thông qua thiết kế và sản xuất: các bộ phận truyền động, bộ giới hạn momen xoắn, khớp nối an toàn, bộ giới hạn momen xoắn không khe hở, khớp nối đàn hồi, khớp nối đĩa, khớp nối không khe hở, ròng rọc tốc độ biến đổi, ròng rọc giãn nở, vòng kẹp trục và vòng kẹp.
ComInTec Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
ComInTec HGP Viet Nam
DF
Friction torque limiter
Sliding Safety coupling where the transmission component is fitted between two friction rings and slides when the calibrated torque is reached. The minimum required to have a low cost protection.
EDF/F
Economic ball torque limiter
Safety coupling with simple and compact balls inserted directly in the drive element of transmission. The disengagement occurs quickly and safely if the calibrated torque is exceeded.
DSR
Rollers torque limiter
A Roller safety coupling that allows a complete disengagement when the calibrated torque is reached. Suitable for transmitting high torque with high reliability and small size.
DSS/SG
Backlash free torque limiter
Ball safety coupling with high technology and backlash free transmission. Device with high sensitivity of intervention, instant and precise disconnection.
DSS/SG/RF
Torque limiter free rotation
Backlash free Safety coupling suitable for high speeds, with free rotation and low residual torque after disengagement that occurs in a precisely and immediately. The re-engagement is manual.
DSM
Modular torque limiter
Modular Safety coupling, robust, suitable for “heavy industries” even at high speeds. After disconnection there is free rotation without residual torque, re-engagement is simple and manual.
PR
Torque limiter for gearboxes
Safety coupling to be mounted between the motor and gear unit thus reducing significantly the size of the device at the same power output. Available in both slip that release versions.
DSA
Axial force limiter
Safety coupling with linear limitation of force. The axial disengagement can take place in both compression and tension once the calibrated force is reached, the re-engagement is automatic.
Roller phase pneumatic clutch “DSR/F/AP”
Transmission through rollers with re-engagement in phase 360° (equidistant on request, 30°, 45°, …);
Free rotation for long periods after overload: … / CS;
Suitable for high rotation speeds;
Maintenance free for high reliability;
Arranged to add a microswitch / proximity to stop the motor drive;
Torque range: 5 – 30000 Nm; max. bore ø120 mm.
Friction pneumatic clutch “DSF/TF/AP”
Friction torque transmission;
As tensioner, brake and torque limiter;
Constant adjustment of the calibration torque;
Available with special friction rings for specific requirements;
Available in version …/SI to stop the transmission after an overload;
Torque range: 3 – 875 Nm; max. bore ø 65 mm.
Electromechanical switch “EM”
Die-cast aluminium box;
Protection level IP57 DIN 40050;
Possibility of 1 contact (EM1) or 2 contacts (EM2) available;
Adjustment of the lever end position possible;
Operation temperature range from -10°C to +85°C;
Three different options of voltage input: 1,5A – 250 VCA; 5A-24 VCC; 0,2A-250 VdC;
Initial stroke 0,7 mm, Extra stroke: 4 ÷ 8 mm depending on setting (possible in a range of 6 mm).
GTR
Torsionally rigid disc coupling with angular backlash free transfer of motion. Transmission and maximum flexibility in operation. Available with personalized spacer.
GRI
Rigid coupling in steel, suitable for shaft connections with good alignment. Available in one or two sections.
GSF
Bellow coupling in aluminium with high torsional rigidity. Backlash free, low inertia and high reliability.
GAS
Elastomeric jaw coupling, good vibration dampening properties. Available with different types of elastomeric element.
GEC
Compact elastic coupling protected from environmental conditions. Fast maintenance possible without the need to move the shafts.
GD
Gear coupling without wear due to the polyamide sleeve, suitable for high axial misalignments.
GC
Chain coupling, simple, economic and easy to assemble. Suitable for dry and dusty environments.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
ComInTec Việt Nam / Hotline : 0938 336 079
Brembo chuyên cung cấp : Phanh Brembo , Phanh kẹp Brembo , Má phanh Brembo. Brembo Việt Nam
Brembo là một công ty hàng đầu thế giới về đổi mới công nghệ trong lĩnh vực di động, phát triển các giải pháp tiên tiến cho xe hơi và các ứng dụng đua xe.
Brembo Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Brembo HGP Viet Nam
Brembo Caliper Disc Brake – Side Mounted
Code: 20.2802.31
Brembo P75b hydraulic caliper brake is available in two different configurations for pressure port, dependent on your application.
Configuration: side mounted
OEM Number: 20.3100.31
Braking Force: 53,016 N
The Brembo P75b Caliper Brake is a reliable and cost-effective solution to support your braking system. Manufactured with safety as the primary concern, P75b Caliper Brake safely stops wind turbine rotors in testing conditions. Ultimately increasing the general availability of your wind turbine application.
Manufactured to provide a long-lasting braking system, Brembo P75b acts as a clamping unit to safely hold and stop rotating discs in your application. Designed to perform in the most adverse conditions, the Brembo brake is resistant to weather corrosion.
ICP P75b Sintered Brake Pad Replaces Vestas 704059
ICP P75b Sintered Brake Pad Replaces Vestas 115760
ICP P75b Sintered Brake Pad Replaces Vestas 115760
Brembo Organic Brake Pad for Brake Caliper P75b
Brembo Organic Brake Pad for Brake Caliper P75b
ICP P75b Sintered Brake Pad Replaces Vestas 704059
Code: CC0014
ICP P75b series is a 6 button sintered brake pad available with a thermistor. A copper base sintered friction material, free of asbestos, lead, and zinc. Manufactured to perform at high friction speeds and high heat temperatures.
Material: FTL 510 (replaces Miba MD550)
OEM replacement: Vestas 704059
Brake type: Brembo 20.3100 / 20.2802
Size: 117.6 x 92.2 x 16.4mm
ICP P75b Sintered Brake Pad Replaces Vestas 115760
Code: CC0013
ICP P75b series is a 6 button sintered brake pad. A copper base sintered friction material, free of asbestos, lead, and zinc. Manufactured to perform at high friction speeds and high heat temperatures.
Material: FTL510 replaces Miba MD550
OEM replacement: Vestas 115760
Brake type: Brembo 20.3100 / 20.2802
Size: 117.6 x 92.2 x 16.4mm
Brembo Organic Brake Pad for Brake Caliper P75b
Code: CA0099
Brembo 107.1710.24 organic brake pad is used on Brembo P75b caliper disc brakes. Developed for various wind turbine applications throughout the world. ICP has developed a diverse range of friction products suitable for the wind energy market.
OEM number: 107.1710.24
Brake type: Brembo P75b
Options: With or without thermistor
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Brembo Việt Nam / Hotline : 0938 336 079
Brembo chuyên cung cấp : Phanh Brembo , Phanh kẹp Brembo , Má phanh Brembo.
Brembo là một công ty hàng đầu thế giới về đổi mới công nghệ trong lĩnh vực di động, phát triển các giải pháp tiên tiến cho xe hơi và các ứng dụng đua xe.
Brembo Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Brembo HGP Viet Nam
Brembo Caliper Disc Brake – Side Mounted
Code: 20.2802.31
Brembo P75b hydraulic caliper brake is available in two different configurations for pressure port, dependent on your application.
Configuration: side mounted
OEM Number: 20.3100.31
Braking Force: 53,016 N
The Brembo P75b Caliper Brake is a reliable and cost-effective solution to support your braking system. Manufactured with safety as the primary concern, P75b Caliper Brake safely stops wind turbine rotors in testing conditions. Ultimately increasing the general availability of your wind turbine application.
Manufactured to provide a long-lasting braking system, Brembo P75b acts as a clamping unit to safely hold and stop rotating discs in your application. Designed to perform in the most adverse conditions, the Brembo brake is resistant to weather corrosion.
ICP P75b Sintered Brake Pad Replaces Vestas 704059
ICP P75b Sintered Brake Pad Replaces Vestas 115760
ICP P75b Sintered Brake Pad Replaces Vestas 115760
Brembo Organic Brake Pad for Brake Caliper P75b
Brembo Organic Brake Pad for Brake Caliper P75b
ICP P75b Sintered Brake Pad Replaces Vestas 704059
Code: CC0014
ICP P75b series is a 6 button sintered brake pad available with a thermistor. A copper base sintered friction material, free of asbestos, lead, and zinc. Manufactured to perform at high friction speeds and high heat temperatures.
Material: FTL 510 (replaces Miba MD550)
OEM replacement: Vestas 704059
Brake type: Brembo 20.3100 / 20.2802
Size: 117.6 x 92.2 x 16.4mm
ICP P75b Sintered Brake Pad Replaces Vestas 115760
Code: CC0013
ICP P75b series is a 6 button sintered brake pad. A copper base sintered friction material, free of asbestos, lead, and zinc. Manufactured to perform at high friction speeds and high heat temperatures.
Material: FTL510 replaces Miba MD550
OEM replacement: Vestas 115760
Brake type: Brembo 20.3100 / 20.2802
Size: 117.6 x 92.2 x 16.4mm
Brembo Organic Brake Pad for Brake Caliper P75b
Code: CA0099
Brembo 107.1710.24 organic brake pad is used on Brembo P75b caliper disc brakes. Developed for various wind turbine applications throughout the world. ICP has developed a diverse range of friction products suitable for the wind energy market.
OEM number: 107.1710.24
Brake type: Brembo P75b
Options: With or without thermistor
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Brembo Việt Nam / Hotline : 0938 336 079
Baker Hughes chuyên cung cấp : Van điều khiển cầu Baker Hughes, Van điều khiển quay Baker Hughes, Van điều khiển Baker Hughes, Van an toàn Baker Hughes, Van xả an toàn Baker Hughes, Bộ định vị van kỹ thuật số Baker Hughes, Bộ định vị van khí nén Baker Hughes. Baker Hughes Việt Nam
Tại Baker Hughes, chúng tôi là một công ty công nghệ năng lượng. Đội ngũ Van cung cấp các giải pháp để tối ưu hóa dịch vụ, cải thiện độ tin cậy, tăng hiệu quả và giảm phát thải trong các ngành công nghiệp chế biến và sản xuất.
Baker Hughes Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Baker Hughes HGP
Masoneilan 10000 Series Double Port Valve
Masoneilan 21000 Series Single Port Valve
Masoneilan 28000 Series Varipak™ Valve
Masoneilan 41005 Series Cage Guided Valve
Masoneilan 80000 Series 3-Way Control Valve
Masoneilan PXR™ Stem and Port Valve
Anti-Surge Valves
Masoneilan 31000 Series Rotary Control Valve
Masoneilan 35002 Series Camflex™ Rotary Control Valve
Masoneilan 36005 Series V-Max™ Control Ball Valve
Masoneilan Conventional Butterfly Control Valves
Masoneilan Triple Offset Butterfly Valves
Pipeline Control Valves
Masoneilan 49000 Series V-LOG™ Low-Noise Anti-Cavitation Valve
Masoneilan 71000 Series Heavy Duty, Streamlined Angle Control Valve
Masoneilan 72000 Series Large Mass Flow / Noise Reduction Valve
Masoneilan 73000 Series Sweep Angle Valve
Masoneilan 74000 Series Heavy Oil Process Valve
Masoneilan 75000 Series Tank Drain and Level Control Valve
Masoneilan 77000 Series Multi-Stage High Pressure Valve
Masoneilan 78400 / 18400 Series LincolnLog™ Anti Cavitation Valve
Masoneilan 84000 Series SteamForm™ Steam Conditioning Valve
Type 1700 Maxiflow™ Safety Valve
Type 2700 Safety Valve
Type 3500 Electromatic™ Ball Valve
Type 1811 Safety Valve
Type 1511 Safety Valve
Consolidated Type 1900/P Safety Valve
Type 1541/1543 Safety Valve
Type 3700 Main Steam Maxiflow™ Safety valve
Type 31700 Pressurizer Valve
Consolidated Type 1900 Dual Media (DM) Safety Relief Valve
Consolidated Type 1900 Safety Relief Valve
Consolidated Type 19000 Safety Relief Valve
Consolidated Type 1982 Safety Relief Valve
Type 2478 Relief Valve
Consolidated 3900/3900 TM Series Pilot-Operated Safety Relief Valves
Consolidated Type 2900/2900 TM Pilot Operated Safety Relief Valve
Consolidated Type 2900-40 Pilot Operated Safety Relief Valve
Consolidated Type 13900 Series Pilot-Operated Safety Relief Valve
Masoneilan SVI3 Digital Valve Positioner
Masoneilan SVI™ FF Valve Positioner
Masoneilan SVI™ II AP Advanced Performance Digital Valve Positioner (HART)
Masoneilan SVI™ II ESD Emergency Shutdown Device
Masoneilan SVi1000 Digital Valve Positioner
Becker Digital Natural Gas Positioner
Becker HPP-4 Series Positioner
Becker HPP-5 Series Positioner
Becker HPP-SB Series Positioner
Pneumatic valve Positioners
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Baker Hughes Việt Nam / Hotline : 0938 336 079
Baker Hughes chuyên cung cấp : Van điều khiển cầu Baker Hughes, Van điều khiển quay Baker Hughes, Van điều khiển Baker Hughes, Van an toàn Baker Hughes, Van xả an toàn Baker Hughes, Bộ định vị van kỹ thuật số Baker Hughes, Bộ định vị van khí nén Baker Hughes.
Tại Baker Hughes, chúng tôi là một công ty công nghệ năng lượng. Đội ngũ Van cung cấp các giải pháp để tối ưu hóa dịch vụ, cải thiện độ tin cậy, tăng hiệu quả và giảm phát thải trong các ngành công nghiệp chế biến và sản xuất.
Baker Hughes Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Baker Hughes HGP Viet Nam
Masoneilan 10000 Series Double Port Valve
Masoneilan 21000 Series Single Port Valve
Masoneilan 28000 Series Varipak™ Valve
Masoneilan 41005 Series Cage Guided Valve
Masoneilan 80000 Series 3-Way Control Valve
Masoneilan PXR™ Stem and Port Valve
Anti-Surge Valves
Masoneilan 31000 Series Rotary Control Valve
Masoneilan 35002 Series Camflex™ Rotary Control Valve
Masoneilan 36005 Series V-Max™ Control Ball Valve
Masoneilan Conventional Butterfly Control Valves
Masoneilan Triple Offset Butterfly Valves
Pipeline Control Valves
Masoneilan 49000 Series V-LOG™ Low-Noise Anti-Cavitation Valve
Masoneilan 71000 Series Heavy Duty, Streamlined Angle Control Valve
Masoneilan 72000 Series Large Mass Flow / Noise Reduction Valve
Masoneilan 73000 Series Sweep Angle Valve
Masoneilan 74000 Series Heavy Oil Process Valve
Masoneilan 75000 Series Tank Drain and Level Control Valve
Masoneilan 77000 Series Multi-Stage High Pressure Valve
Masoneilan 78400 / 18400 Series LincolnLog™ Anti Cavitation Valve
Masoneilan 84000 Series SteamForm™ Steam Conditioning Valve
Type 1700 Maxiflow™ Safety Valve
Type 2700 Safety Valve
Type 3500 Electromatic™ Ball Valve
Type 1811 Safety Valve
Type 1511 Safety Valve
Consolidated Type 1900/P Safety Valve
Type 1541/1543 Safety Valve
Type 3700 Main Steam Maxiflow™ Safety valve
Type 31700 Pressurizer Valve
Consolidated Type 1900 Dual Media (DM) Safety Relief Valve
Consolidated Type 1900 Safety Relief Valve
Consolidated Type 19000 Safety Relief Valve
Consolidated Type 1982 Safety Relief Valve
Type 2478 Relief Valve
Consolidated 3900/3900 TM Series Pilot-Operated Safety Relief Valves
Consolidated Type 2900/2900 TM Pilot Operated Safety Relief Valve
Consolidated Type 2900-40 Pilot Operated Safety Relief Valve
Consolidated Type 13900 Series Pilot-Operated Safety Relief Valve
Masoneilan SVI3 Digital Valve Positioner
Masoneilan SVI™ FF Valve Positioner
Masoneilan SVI™ II AP Advanced Performance Digital Valve Positioner (HART)
Masoneilan SVI™ II ESD Emergency Shutdown Device
Masoneilan SVi1000 Digital Valve Positioner
Becker Digital Natural Gas Positioner
Becker HPP-4 Series Positioner
Becker HPP-5 Series Positioner
Becker HPP-SB Series Positioner
Pneumatic valve Positioners
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Baker Hughes Việt Nam / Hotline : 0938 336 079
Masonlilan chuyên cung cấp : Van bi Masonlilan, Van bướm Masonlilan, Van cổng Masonlilan, Van cầu Masonlilan, Van một chiều Masonlilan, Van điều khiển Masonlilan, Van khóa Masonlilan. Masonlilan Việt Nam
Tập đoàn Van Masonlilan được thành lập. Sau nhiều năm phát triển, Masonlilan đã trở thành nhà sản xuất hàng đầu trong lĩnh vực van đặc biệt áp suất cao, chẳng hạn như thiết bị bypass tuabin hơi nước tại Hoa Kỳ và thậm chí trên thế giới.
Masonlilan Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Masonlilan HGP Viet Nam
Horizontal high-temperature reactor
Vertical high-temperature reaction kettle
MS650P Series Eccentric Rotating Valve
MS100 Series High Pressure Welding Pneumatic Control Valve
MS200 Series Thin Film Actuator
MS100 Series Control Valve
MS670G Series High Performance Butterfly Valve
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS650G Series O-Type Ball Valve
MS650F Floating Ball Valve
BMS650Y41 Pneumatic Ball Valve
MS650P Series Eccentric Rotating Valve
The valve body features a simple flow path with minimal flow resistance. It integrates the advantages of both linear and rotary valves, offering outstanding performance with a broad range of regulation and high control accuracy.
MS100 Series High Pressure Welding Pneumatic Control Valve
MS100 Series Control Valve
MS100-PDF Product Features: The MS100 series regulating valve is a universal Globe valve body, with a light load design and a top guided single seat regulating valve
MS670G Series High Performance Butterfly Valve
The MS670G series high-performance butterfly valve features a dual offset structure. The axis center is offset from the valve body structure center, combined with a circular arc sealing surface design on the valve plate.
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS670-PDF The MS670 series triple offset hard sealing butterfly valve features a dual offset structure combined with an asymmetrical sealing surface design.
MS650G Series O-Type Ball Valve
This product is a right-angle rotary type shut-off valve, which is also occasionally used as a control valve.
MS650F Floating Ball Valve
MS650-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
BMS650Y41 Pneumatic Ball Valve
BMS650Y41-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
Horizontal high-temperature reactor
Vertical high-temperature reaction kettle
MS650P Series Eccentric Rotating Valve
MS100 Series High Pressure Welding Pneumatic Control Valve
MS200 Series Thin Film Actuator
MS100 Series Control Valve
MS670G Series High Performance Butterfly Valve
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS650G Series O-Type Ball Valve
MS650F Floating Ball Valve
BMS650Y41 Pneumatic Ball Valve
MS650P Series Eccentric Rotating Valve
The valve body features a simple flow path with minimal flow resistance. It integrates the advantages of both linear and rotary valves, offering outstanding performance with a broad range of regulation and high control accuracy.
MS100 Series High Pressure Welding Pneumatic Control Valve
MS100 Series Control Valve
MS100-PDF Product Features: The MS100 series regulating valve is a universal Globe valve body, with a light load design and a top guided single seat regulating valve
MS670G Series High Performance Butterfly Valve
The MS670G series high-performance butterfly valve features a dual offset structure. The axis center is offset from the valve body structure center, combined with a circular arc sealing surface design on the valve plate.
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS670-PDF The MS670 series triple offset hard sealing butterfly valve features a dual offset structure combined with an asymmetrical sealing surface design.
MS650G Series O-Type Ball Valve
This product is a right-angle rotary type shut-off valve, which is also occasionally used as a control valve.
MS650F Floating Ball Valve
MS650-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
BMS650Y41 Pneumatic Ball Valve
BMS650Y41-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Masonlilan Việt Nam / Hotline : 0938 336 079
Masonlilan chuyên cung cấp : Van bi Masonlilan, Van bướm Masonlilan, Van cổng Masonlilan, Van cầu Masonlilan, Van một chiều Masonlilan, Van điều khiển Masonlilan, Van khóa Masonlilan.
Tập đoàn Van Masonlilan được thành lập. Sau nhiều năm phát triển, Masonlilan đã trở thành nhà sản xuất hàng đầu trong lĩnh vực van đặc biệt áp suất cao, chẳng hạn như thiết bị bypass tuabin hơi nước tại Hoa Kỳ và thậm chí trên thế giới.
Masonlilan Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
Masonlilan HGP Viet Nam
Horizontal high-temperature reactor
Vertical high-temperature reaction kettle
MS650P Series Eccentric Rotating Valve
MS100 Series High Pressure Welding Pneumatic Control Valve
MS200 Series Thin Film Actuator
MS100 Series Control Valve
MS670G Series High Performance Butterfly Valve
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS650G Series O-Type Ball Valve
MS650F Floating Ball Valve
BMS650Y41 Pneumatic Ball Valve
MS650P Series Eccentric Rotating Valve
The valve body features a simple flow path with minimal flow resistance. It integrates the advantages of both linear and rotary valves, offering outstanding performance with a broad range of regulation and high control accuracy.
MS100 Series High Pressure Welding Pneumatic Control Valve
MS100 Series Control Valve
MS100-PDF Product Features: The MS100 series regulating valve is a universal Globe valve body, with a light load design and a top guided single seat regulating valve
MS670G Series High Performance Butterfly Valve
The MS670G series high-performance butterfly valve features a dual offset structure. The axis center is offset from the valve body structure center, combined with a circular arc sealing surface design on the valve plate.
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS670-PDF The MS670 series triple offset hard sealing butterfly valve features a dual offset structure combined with an asymmetrical sealing surface design.
MS650G Series O-Type Ball Valve
This product is a right-angle rotary type shut-off valve, which is also occasionally used as a control valve.
MS650F Floating Ball Valve
MS650-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
BMS650Y41 Pneumatic Ball Valve
BMS650Y41-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
Horizontal high-temperature reactor
Vertical high-temperature reaction kettle
MS650P Series Eccentric Rotating Valve
MS100 Series High Pressure Welding Pneumatic Control Valve
MS200 Series Thin Film Actuator
MS100 Series Control Valve
MS670G Series High Performance Butterfly Valve
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS650G Series O-Type Ball Valve
MS650F Floating Ball Valve
BMS650Y41 Pneumatic Ball Valve
MS650P Series Eccentric Rotating Valve
The valve body features a simple flow path with minimal flow resistance. It integrates the advantages of both linear and rotary valves, offering outstanding performance with a broad range of regulation and high control accuracy.
MS100 Series High Pressure Welding Pneumatic Control Valve
MS100 Series Control Valve
MS100-PDF Product Features: The MS100 series regulating valve is a universal Globe valve body, with a light load design and a top guided single seat regulating valve
MS670G Series High Performance Butterfly Valve
The MS670G series high-performance butterfly valve features a dual offset structure. The axis center is offset from the valve body structure center, combined with a circular arc sealing surface design on the valve plate.
MS670 Series Three-eccentric-hard-seal Butterfly Valve
MS670-PDF The MS670 series triple offset hard sealing butterfly valve features a dual offset structure combined with an asymmetrical sealing surface design.
MS650G Series O-Type Ball Valve
This product is a right-angle rotary type shut-off valve, which is also occasionally used as a control valve.
MS650F Floating Ball Valve
MS650-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
BMS650Y41 Pneumatic Ball Valve
BMS650Y41-PDF The product offers reliable sealing, a simple structure, and easy maintenance.
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
Masonlilan Việt Nam / Hotline : 0938 336 079
DETER chuyên cung cấp : Xi lanh DETER, Xi lanh khí nén DETER, Van DETER, Van khí nén DETER, Bộ lọc DETER. DETER Việt Nam
Xi lanh khí nén Deter Fluid Technik là một xi lanh thanh giằng chất lượng cao được thiết kế để sử dụng trong nhiều ứng dụng công nghiệp khác nhau.
DETER Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
DETER HGP
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
DETER / Hotline : 0938 336 079
DETER chuyên cung cấp : Xi lanh DETER, Xi lanh khí nén DETER, Van DETER, Van khí nén DETER, Bộ lọc DETER. Đại lý DETER Việt Nam
Xi lanh khí nén Deter Fluid Technik là một xi lanh thanh giằng chất lượng cao được thiết kế để sử dụng trong nhiều ứng dụng công nghiệp khác nhau.
DETER Viet Nam Distributor / Hotline : 0938 336 079 / Email : phu@hgpvietnam.com
DETER HGP Viet Nam
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
PWQ-100002-A / PWQ-100002-E
DPW-100011/E
DPW100006
DPW-100004/E
DPA-010-060-075
DPA-020-120-150
Liên hệ : Công ty TNHH TM KT Hưng Gia Phát để được hỗ trợ giá và thời gian giao hàng nhanh nhất.
DETER Việt Nam / Hotline : 0938 336 079
You cannot copy content of this page
